Saturday, August 10, 2013

Resurrected 50 year old Tiger Moth

Once flown with Galloping Ghost RC control and a throttle equipped indestructible ENYA 19 engine for power. The model was scratch built from Aeromodeller free flight plans and was modified for 3 channel radio control.
 Now converted to brushless electric power and mounted on a pair of light weight Styrofoam floats for lake flying. 


Preliminary trials were disappointing because the EMC 40 size motor did not rev-up sufficiently to develop maximum power for water take-offs.. After much experimenting such as, changing propeller sizes, reprogramming the ESC setting. changing the battery voltage:;all to no avail, the problem remained unresolved. Until a fresh look at the problem; fully one year later, revealed that on spool-up the left hand threads joining the front housing, carrying the bearing to the cylinder to which the permanent magnets are attached were backing off; allowing the magnets to drag on the poles. This unscrewing continued until the motor bound up suddenly and completely, making the problem and solution obvious. The solution to the unscrewing problem was to weld the threads, by running a bead of CA glue around the joint. I could have used LocTite but I did not have any at the time and, I could not imagine why I would ever need to undo this joint in the future, so permanently gluing the components was a good choice.
Taxi Trials:  

Thursday, July 26, 2012

Clancy Aviation 40 inch Lazy Bee


The nitro version of the famous Lazy Bee when fitted with a pair of GWS floats proves that it can also be crazy bee when the taps are opened on its OS MAX 11 CZ car engine.
I purchased this model many years ago and flew if a few times with its not so reliable, Cox 09 RC engine before putting it aside and going on to other more flyable models. It was stored at my hanger (8X12 foot garden shed) at the lake for a couple of years before giving it a try as a float flyer. It was mounted on a pair of rather small GWS foam and plastic floats that were intended for a much lighter electric foamy Tiger Moth. Using a light weight 3 inch Dan Brown wheel on the tail to serve as a combination, tail float and rudder the Bee proved to be well at home on the water.
The powerful CZ engine gives the Bee sufficient punch to execute some snappy water take-offs and turn the lazy one, into something that can only be described as a crazy thing.
The engine itself was a pleasant surprise: easy starting; extremely reliable throughout its full speed range; and with an idle so sweet, that it was approached by a couple of baby otters while idling at the water's edge. The poor confused little guys must have though it was their mother calling them for dinner (too bad they were not caught on the video).
http://youtu.be/Uej5UzicF-Y